Description
Train-O-Matic Lokommander 2 Mini NEM 652 (9 wires + 8 pins) (W8P)
Excellent value 6 function decoder, drive, lights (head and tail), plus 4 additional auxiliary functions, of size to fit most OO gauge models without modification and some N Gauge
Size: 19.5 x 11 x 3.3mm
Functions : 4x AUX: 1 wire, 3 soldering pads
SUSI:- Solder pads
Note this decoder is shown without heat shrink to demonstrate the build quality, all Lokommander 2 Mini NEM 652 (9 wires + 8 pins) (W8P) are shipped fully shrink wrapped for installation without the possibility of shorting (see additional gallery image)
Lokommander 2 decoder series
– NMRA compliant DCC locomotive decoder
– Short (1-127) and long (128-9999) configurable addresses
– 14, 28/128 speed steps
– Maximum motor current 1000mA
– Load compensation and BEMF
– Speed set at 3 points (Vmin, Vmid, Vmax) or in tabular form
– Shunting speed
– Constant distance braking, activated on ABC/DC sector or at zero speed
– Reduced speed drive on ABC Slow Speed section
– Penduling function (Push-Pull) without or with intermediar stop
– Up to 10 dimmable auxiliary outputs
– Function output maximum 200 mA per output, maximum of all outputs 400mA
-Output Mapping to functions F0, F1-F12
– Short-circuit and over-current protection of motor and auxiliary outputs
– Bidirectional communication RAILCOM
– SUSI© and LocoWire© interface
– Outputs for Smart Power Pack (SPP ©)
– Electromagnetic uncoupler drive capability
– Upgradable software via the programmer, even with the decoder mounted in the locomotive
– Usable in H0, TT and N scale models
– Supply voltage 4-24V
– Ability to set different speeds for forward and reverse
